Getting the right home security system is vital when it comes to protecting your family and possessions in your home.
A Ring video doorbell can be a great way to add security and allow you to speak with visitors at the front door.
If you’ve found with the ring doorbell poor video quality, something is probably wrong with the connection between the doorbell and its power source.
When you are having this problem, it is important to check that the wires are properly connected before assuming that there is something wrong with the device itself.
There are many reasons why your Ring doorbell isn’t functioning properly. A lot of users complain about the video and microphone not working, the video quality being interrupted and volume problems among others.
If this is an issue you are experiencing, let’s dive into what causes these problems and how to fix them. In this article, we’ll cover the ways to improve the video quality of a Ring doorbell video.
How To Improve Ring Doorbell Video – Step-by-Step Guide!
If you are having poor video quality while using a Ring doorbell, it could be because of several reasons. To fix these problems, you can try the following methods:
- Make Sure That Your Connection is Properly Installed
The first thing you should check when your Ring device is not recording video properly is the wiring.
Ensure that the wires are installed properly to get a good signal between the doorbell and its power source.
It may be possible that your Ring Doorbell isn’t receiving enough power and is causing it to function incorrectly.
- Verify That The Doorbell is Properly Mounted
Ensure that the Ring doorbell has been properly mounted on your home. You can check this by looking at the LED light on the device; it should be green all the time when you install it correctly.
If the LED light turns off, it could be because the device is not properly mounted. There are certain angles where it can’t sense very easily which means you should reposition the doorbell again to get better video quality.
- Make Sure That The Camera Lens Isn’t Dirty or Scratched
The Ring doorbell has a camera lens that is located on the front side of the device. This lens can become dirty or scratched over time due to environmental conditions.
If this happens, it will cause issues with video quality and you should clean or replace the lens for better performance.
- Check Your Internet Connection
If your Ring doorbell has poor video quality, it may be because there is a problem with your internet connection.
You can go to Router login or you can use an app like Fing that will show you the IP address of your router and give you more information on what’s sending and receiving data from it.
- Make Sure That The Motion Sensor Is Not Blocking The Camera
Sometimes the video quality is not good or it can’t sense movement, there may be a problem with the motion sensor.
You should check to make sure that this device isn’t blocking your camera’s sensors because this will prevent your Ring device from recording any activity in front of it.
- Check Your Microphone
If you are having issues with the microphone on your Ring doorbell, you should check to see if it is blocked or dirty. If this is the case, you can clean or replace the microphone.
- Check The Power Source
To have better video quality for your Ring doorbell, it needs a constant power source.
Make sure that this device has enough power to function properly. If the power source is low, it could be causing poor video quality.
- Check For Interference
If you are facing interference or problems with your Ring device, there may be an issue with the signal between this device and your router for an internet connection.
This problem is usually common if other electronics are operating near your Ring device, so be sure to check the area and do what you can to get rid of any interference you find.
Why Is Your Ring Video Blurry At Night?
If your Ring video is blurry at night, it could be one of several reasons. To improve the photo quality, you should try some or all of these tips:
1. Change The Angle Of Your Device
Check to see if the angle of your Ring doorbell has been adjusted properly. Because motion-sensing depends on position and angle, something as small as a few degrees could make your Ring doorbell unable to sense motion.
2. Adjust The Motion Sensing Setting On Your Device
Another thing to check for is whether or not the motion-sensing setting has been adjusted properly. You will find these settings on the web portal, and if they are incorrect it can make everything blurry when there is motion.
3. Clean The Camera Lens Of Your Device
Sometimes the video quality is affected by a buildup of dirt on your Ring doorbell camera lens. Over time, this ring can become dirty and affect the photo clarity of your device because it prevents it from focusing properly.
4. Check For Other Electronic Devices Near Your Device
Electronics can seriously affect the performance of your Ring device. To get the best video quality, make sure that no other electronics are operating near your device because they can cause interference or even block it entirely due to location.
5. Check Your Internet Connection
The good news is that if you are having blurring problems with your Ring doorbell after dark, the issue is most likely with your internet connection and not the device itself.
To get better video quality, make sure that you have a working internet connection. You can troubleshoot your router and/or modem to make sure everything is in working order before calling Ring support.
As you can see, several potential problems might be affecting your Ring device. By trying some or all of these tips, you may find the quality of your video improving.
Of course, another option is to install a new device. Before doing this, make sure that the issue is not with your internet connection because this problem could affect all your devices, not just the one at your door.
If you are still having problems after trying all of these, it is possible that there is something wrong with your Ring doorbell and you need to call support for assistance.
Frequently Asked Questions
The Ring uses a wireless signal just like your computer, phone, or tablet.
If you are experiencing problems with the video quality on your device, it could be the result of some interference with this wireless signal.
Try moving your device closer to your router and see if that changes anything.
Although Ring is a capable device on its own, poor video quality can be the result of several things.
Because hardware and internet connection issues can affect how well your Ring camera works, you may want to do some troubleshooting first before calling support.
You can try to upgrade your Ring camera, but it depends on the type of system you currently have.
Replacement cameras are available for purchase online through Ring’s website, but they may not be compatible with your current hardware.
If you find that you are having issues with getting your Ring doorbell to work, try testing your power source.
If there is not enough power, the video quality of the ring may be poor or distorted. Make sure that you have working batteries before calling support.
False alarms are more common when the motion sensor is set too high.
To avoid this, try adjusting the angle of your device to make sure it is only capturing what you are looking for instead of everything in the area.
You can also try testing out your Ring doorbell before installation to see how well it works in that specific location.
I am John Kouchek, the founder of Own The Smart Home. I am passionate about making homes smarter and more efficient. I have a degree in Robotics and Automation (MSc) and have worked in the home automation industry for over 10 years. Learn More!